Seasonal service
HVAC Maintenance in Suwanee, GA
What will the readings show before the next season? A tune-up finds out while problems are still small.
Which Problems Does a Tune-Up Catch?
More than most people expect. A run capacitor drifting below its rated value. Contactor points starting to pit. Algae building in the condensate line. A refrigerant charge that has slipped because of a slow leak. A flame sensor with enough residue to cause the occasional lockout. None of these will stop the system this afternoon, but any one of them can shut it down on the hottest day of summer or the coldest night of winter. Maintenance from HVAC Suwanee is built around measuring those things before they fail. Ahead of cooling season, we clean the outdoor coil, inspect the indoor coil, flush the drain, test electrical components and record refrigerant pressures, temperatures and airflow. Ahead of heating season, attention shifts to burners and ignition, the flame sensor, safety and limit controls, venting and the blower. Heat pumps need both because they work in both seasons. We finish by fitting a new filter and handing over a written report of the readings, what we found and anything to keep an eye on. There is nothing to join and no plan to buy. Call before each season and we will set up a visit.
What Is Included in a Tune-Up?
The checklist shifts with the season, but these items are part of nearly every visit.
Coil cleaning and inspection
Outdoor coil cleaned and indoor coil checked so heat transfers efficiently.
Drain and float switch
We clear the condensate run, look over the pan and trip the float switch to confirm it shuts things down when it should.
Electrical testing
Capacitors, contactors, terminals and wiring measured and tightened.
Refrigerant readings
Pressures and temperatures recorded to spot a low charge or developing leak.
Airflow measurements
Blower performance and temperature split checked across the system.
Burner and safety checks
Ignition, flame sensor, limit and pressure switches and venting inspected on gas furnaces.
New filter
A fresh filter installed so the system starts the season breathing freely.
Written report
Readings and findings recorded so you can track how the system changes over time.
How Does a Maintenance Visit Go?
Pick a day
Visits are available seven days a week, so a tune-up fits around work and school.
Clean, test and measure
The technician works through the checklist and shows you any part that is worn or drifting.
Review the report
You receive the written readings and a new filter. Any suggested repair comes with a price and no pressure.
Why Book Maintenance With Us?
Numbers on paper
Every visit's readings are recorded, which makes season-over-season changes easy to spot.
No upselling
We point out real issues and leave the decision to you.
Tidy visits
Drop cloths and cleanup around the indoor and outdoor equipment.
- Seasonal checklist
- Recorded readings
- Written report
- Nothing to join
Is a New Season Coming Up?
Servicing the system ahead of summer's peak or winter's first hard cold is the easiest way to sidestep a breakdown. Tell us what day works.